Precautions When Using Plastic Tarpaulins On Trucks

Nowadays, with the increasing use of plastic tarpaulins, the number of plastic tarpaulin wholesale markets is also increasing, which means that the scope of application of tarpaulins is getting wider and wider. However, if the plastic tarpaulin is used on a truck, there are a few things to be aware of:

1. The goods that need to be reinforced need to be bundled and reinforced before the tarpaulin is covered. There is no waste such as old rope ends and iron wires remaining on the T-shaped iron of the truck. When the loading height of the tarpaulin cargo is lower than the side wall of the vehicle end, the tarpaulin bracket shall be firmly installed, and the height of the bracket shall not be lower than 500 mm of the height of the top surface of the side wall of the vehicle end.

2. It should be noted that the tarpaulin can only be used for open cars. The loading height of other vehicles and goods is more than 1m above the side wall of the open car end or the open car with escorts is not allowed to cover the tarpaulin.

3. Quality inspection of the tarpaulin before use. The cloth body is intact and unbroken, and the eye rims are intact, the marks and numbers are complete and clear, the ropes are complete, complete, without joints, the plug is firm, and the connection with the tarpaulin is correct.